-
×
Dynabrade 78686 D4 Cartridge Roll Mandrel 1/8" Pilot Dia. x 3/4" Pilot Length, 1/8" Shank Dia. x 1" Shank Length
1 × $4.32 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
1000 × $0.58 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,424.71 -
×
Dynabrade 78695 D8-4 Cartridge Roll Mandrel 1/8" Pilot Dia. x 3/4" Pilot Length, 1/4" Dia. Shank x 4" Shank Length
1 × $14.70 -
×
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
20 × $12.65 -
×
3M 02960, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1 in x 1 in, 7100009186, Box of 3
1 × $132.29 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
30 × $9.52 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74 -
×
Dynabrade 94990 1/4" Female Composite-Style Coupler with 1/4" Male Plug Assembly
1 × $40.31 -
×
3M 66631, Cloth Belt 341D, 60 X-weight, 6 in x 48 in, Film-lok, Single-flex, 7000118865, 20 per case
40 × $11.12 -
×
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
300 × $6.03 -
×
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
1 × $4.57 -
×
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
500 × $0.75 -
×
3M 66625, Cloth Belt 341D, 36 X-weight, 6 in x 48 in, Film-lok, Single-flex, 7000118861, 20 per case
20 × $13.52 -
×
3M 76624, Roloc Disc 777F, 60 YF-weight, TR, 1 in, Die R100N, 7000045620
500 × $0.62 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
500 × $0.73 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67
3M 09276, Regalite Floor Surfacing Discs, 7 in x 5/16 in, 752I, 36 Grit, 7010384125, 200/case
$1.18
Factory Stock, 7-10 Day Leadtime
3M floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite mineral, and tough paper backing.
3M Resinite Floor Surfacing Discs are precut. Sharp, fast cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
