-
×
3M 50013, Venture Tape Cloth Duct Tape 1500, Silver, 72 mm x 55 m (2.83 in x 60.1 yd), 7010337384
16 × $22.28 -
×
3M 02593, Stikit Gold Sheet Roll, P240, 2-3/4 in x 45 yd, 7000028244
10 × $62.51 -
×
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
200 × $1.39 -
×
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
500 × $0.67 -
×
3M 93947, Scotch Stucco Tape 3260-A, 1.88 in x 60 yd (48 mm x 54.8 m), Stucco Tape, 7010384961
12 × $6.60 -
×
3M 28848, Unitized Wheel Mandrel 28848, 1-5/8 in x 1/4 in x 3/4 in x 1/4 in, 7100082547
5 × $18.31 -
×
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
1 × $9.18 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
1000 × $0.67 -
×
3M 27551, EMI Copper Foil Shielding Tape 1181, 1/2 in x 18 yd (12.70 mm x 16.5m), 7000132182
18 × $39.89 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61 -
×
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
1000 × $0.67 -
×
Dynabrade 52861 .4 hp Straight-Line Pencil Grinder, Rear Exhaust, 25,000 RPM, 1/8" Collet
1 × $555.41 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
400 × $0.97 -
×
Standard Abrasives 700743, Cartridge RoII Mandrel, 1/8 in x 3/4 in x 1/8 in x 1 in x 2-3/4 in CM-4, 7010368728
5 × $4.32 -
×
3M 29833, Sanding Screen, 120 Grit, 18 in x NH, 7100160843
12 × $6.55 -
×
Standard Abrasives 710870, Cartridge Roll Mandrel, 1/8 in x 1/2 in x 1/4 in x 1-1/4 in x 2-1/4 in CM-7, 7000121794
5 × $4.71 -
×
3M 28817, STIKIT LOW PROFILE DISC PAD, EXTRA FIRM, 5 IN X 3/8 IN X 5/16 IN, 24 EXTERNAL, 7010361145
10 × $26.24 -
×
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
200 × $0.95 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $500.06 -
×
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
200 × $1.50 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.60 -
×
3M 11137, Roloc Disc 361F, 50 YF-weight, TR, 1-1/2 in, Die R150S, 7000045094
1000 × $0.73
-
×
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
40 × $12.65 -
×
3M 05441, Stikit Hand Block, 2-3/4 in x 7-3/4 in, 7000045765
10 × $34.55 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74
3M 09271, Regalite Floor Surfacing Discs, 7 in x 7/8 in, 752I, 40 Grit, 7010339879, 200/case
$1.10
Factory Stock, 7-10 Day Leadtime
3M floor edger discs offer great productivity and value on bare wood or nongummy finishes. They cut faster, run cooler and last longer than conventional discs. The discs feature the familiar purple Regalite mineral, and tough paper backing.
3M Resinite Floor Surfacing Discs are precut. Sharp, fast cutting synthetic mineral with a tough, flexible paper or combination backing. These discs save time and deliver a better value, better finish, and longer life.
