-
×
Dynabrade 78726 3/8" x 3/8"-B122 Dynacut A/O Mounted Point, Vitrified, 5/pack
5 × $1.38 -
×
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
500 × $0.67 -
×
3M 76750, Roloc Disc 777F, 60 YF-weight, TS, 2 in, Die RS200P, 7010299188
200 × $1.12 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67 -
×
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
1 × $80.58 -
×
3M 34675, 641WY, 1" X 30", 400 Mesh, Diamond Cloth Belts, 7100111369
3 × $0.00 -
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,424.71 -
×
3M™ 37018, Supplied Air Respirator Vortex Cooling Assembly V-100/37018(AAD), 70070799013, 1 EA/Case
1 × $397.07 -
×
Dynabrade 78724 3/8" x 3/4"-B52 Dynacut A/O Mounted Point, Vitrified, 5/pack
5 × $1.46 -
×
3M 26022, PPS Series 2.0 Adapter, Type S12, 10 mm Male, 1.0 mm Thread, 7100135943
1 × $25.96 -
×
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113
1 × $0.86 -
×
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
1 × $370.16 -
×
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
200 × $1.33
3M 07498, Stripe Off Wheel, 4 in x 5/8 in, with Mandrel, 7000028551, 5 per case
$47.07
Factory Stock, 7-10 Day Leadtime
Our 3M Stripe Off Wheel was designed for high-speed removal of vinyl, decals, tape, graphics and double sided molding striping and trim. We engineered this wheel to help operators achieve effective and efficient decal removal without damaging the surface below.
Our 3M Stripe Off Wheel moves in a rapid, circular motion to remove unwanted decals and stripes. The solid molded wheel rids the substrate of decals with friction, instead of abrasives, thereby preventing scratching and damage to the substrate. The wheel can be used at a Max RPM of 4,000. Operators should note that it is important not to exceed the maximum operating speed, because it may compromise the product’s performance. Additionally, operators should ensure that the substrate is not heat sensitive, as repeated friction will create heat.
Trust our 3M Stripe Off Wheel to cleanly and efficiently remove unwanted decals without substrate damage.
