-
×
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
200 × $0.97 -
×
Dynabrade 78781 1/2" x 1/2"-W185 Dynacut Cotton Fibre Polishing Mounted Point, 120GFX, 10/pack
10 × $7.56 -
×
ACS CX1250 Diamond Belt, 1/2" X 24" 250u
12 × $8.20 -
×
3M 00254, Scotch-Brite Clean and Finish Roll, 12" x 30ft, CF-RL, Talc, 7000045859
1 × $345.52 -
×
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
1 × $500.06 -
×
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
500 × $0.58 -
×
Norton 66623325035 - 2" 120 Grit Fine Grade Aluminum Oxide Vortex Rapid Prep Green TR Non-Woven Surface Preparation Disc, 50 Each
50 × $1.76 -
×
3M 34675, 641WY, 1" X 30", 400 Mesh, Diamond Cloth Belts, 7100111369
3 × $0.00 -
×
Dynabrade 78752 2" x 1"-W242 DynaFire A/O Mounted Point, Vitrified, 5/pack
5 × $3.86 -
×
3M 33349, 641WY 1/4" X 24", 220 Mesh Diamond Cloth Belt, 7010534919
30 × $9.52 -
×
3M 05442, Stikit Soft Hand Block, 2-3/4 x 5 in, 7000045435
10 × $28.89 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.60 -
×
3M 08916 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium, 2 in x 60 in, 7010309628
10 × $30.29 -
×
3M 06840, Booth Coating, 5 gal, 7000120531
1 × $467.27 -
×
3M 62615, Scotch-Weld Threadlocker TL90, Green, 10 mL Bottle, 7100039234, 10/case
10 × $13.32 -
×
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
500 × $0.67
3M 07498, Stripe Off Wheel, 4 in x 5/8 in, with Mandrel, 7000028551, 5 per case
$47.07
Factory Stock, 7-10 Day Leadtime
Our 3M Stripe Off Wheel was designed for high-speed removal of vinyl, decals, tape, graphics and double sided molding striping and trim. We engineered this wheel to help operators achieve effective and efficient decal removal without damaging the surface below.
Our 3M Stripe Off Wheel moves in a rapid, circular motion to remove unwanted decals and stripes. The solid molded wheel rids the substrate of decals with friction, instead of abrasives, thereby preventing scratching and damage to the substrate. The wheel can be used at a Max RPM of 4,000. Operators should note that it is important not to exceed the maximum operating speed, because it may compromise the product’s performance. Additionally, operators should ensure that the substrate is not heat sensitive, as repeated friction will create heat.
Trust our 3M Stripe Off Wheel to cleanly and efficiently remove unwanted decals without substrate damage.
