-
×
Dynabrade 15420 Dynafile III Abrasive Belt Tool
1 × $963.87 -
×
3M 17528 Scotch-Brite Surface Conditioning Low Stretch Belt, SC-BL, A/O Very Fine, 1-1/2 in x 60 in, 7010292405
10 × $28.08 -
×
3M 17181, Scotch-Brite Roloc Unitized Wheel Pack 987S, 2 in, 7000144150
5 × $72.45 -
×
3M 50216, Temflex Cotton Friction Tape 1755, 3/4 in x 82-1/2 ft, Black, 7010297809
60 × $10.08 -
×
3M 13172, Scotch-Brite Multi-Finishing Wheel, MU-WL, 2S Fine, 6 in x 1 in x 1 in, 7000136471
3 × $50.65 -
×
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
200 × $1.25 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.60 -
×
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
200 × $1.74 -
×
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
200 × $1.61 -
×
3M 16162, PTFE Glass Cloth Tape 5453, Brown, 2 in x 36 yd, 8.2 mil, 7000144794
6 × $491.18 -
×
3M 15145 Scotch-Brite Surface Conditioning Low Stretch Belt, SC-BL, A/O Medium, 1 in x 132 in, 7010364529
5 × $31.68 -
×
3M 49830, Multi-Purpose Duct Tape 3900, Red, 48 mm x 54.8 m, 8.1 mil, 7000144749
24 × $17.21 -
×
Dynabrade 92114 1/2" W x 12" L 180 Grit A/O DynaCut Belt, 50/pack
100 × $1.20 -
×
3M 00584 Scotch-Brite Surface Conditioning Belt, SC-BS, A/O Medium, 3 in x 118 in, 7010365595
5 × $68.74 -
×
Norton 66254414832 - 3" X 1/4" X 1/4" Vortex Rapid Blend Unified Wheel, 5am U2305, 40 Each
40 × $11.93 -
×
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
1 × $1,493.91 -
×
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
500 × $0.60
3M 02795, STIKIT SOFT INTERFACE DISC PAD, 5 IN X 1/2 IN, 7010328334
$3.86
Factory Stock, 7-10 Day Leadtime
3M Soft Interface Disc Pad is constructed of _ inch soft density foam with a 3M Clean Sanding hole pattern to allow dust extraction and minimize loading during sanding. The soft foam construction enables the pad to conform to edges and contours, making it a good match for sensitive workpieces where gouging and marring is a top concern.
Providing Cushion and Conformability
3M Soft Interface Disc Pad provides a greater cushion and more conformability than a pad with medium density foam. Use this pad to reduce edge cutting when the pad is tipped on edge and maintain closer contact with the edge while maximizing dust extraction. The pad contains a series of uniquely designed holes which match those in 3M Clean Sand Back Up Pads, allowing sanding dust to be pulled through the holes and away from the sanding surface. This improves the work environment and prolongs disc life.
Easy Attachment
The Soft Interface Disc Pad has two sides. One side features loop material, which attaches to the back up pad used on the sanding tool. The opposite side contains hook material, which attaches to the Hookit sanding disc of choice.
Altogether, our 3M Soft Interface Disc Pad is ideal for operators who seek an added level of conformability for their sanding projects. The responsive foam design, attachment system and Clean Sanding hole pattern combine to cushion the workpiece, minimize dust and ? ultimately ? get the job done.
