3M Screen Cloth Disc Hand Pad Goes Hand in Hand with 3M Screen Cloth Discs
3M Screen Cloth Disc Hand Pad goes hand in hand with 3M Screen Cloth Discs. Use die numbers 500GC (5? diameter with 2 tabs), 600JR (6? diameter with 2 tabs) and 800JM (8? diameter with 2 tabs) (sold separately). Mineral is adhered to both sides of 3M screen cloth discs, so when one side of the disc wears down the other may be used. While operators typically use these discs dry during hand sanding, the screen is water resistant and may be used with a lubricant if necessary.
Each disc features two tabs. The holder pad has two ?tacks? designed for these tabs. Operators simply pierce the tabs on the disc with the tacks on the hand pad to secure the disc in place. This easy and convenient attachment system eliminates the need for adhesive, which has two key benefits. First, it helps minimize the mess that adhesive can sometimes cause. Second, as one side of the disc is not sacrificed for adhesive, both sides may be used and the disc is put to optimal use.
A Remedy for Small Surface Imperfections
When eliminating surface imperfections, evenly-applied pressure and consistent finishes tend to be top concerns. With these goals in mind, we created the 3M Screen Cloth Disc Hand Pad. This abrasive accessory helps operators apply even pressure to their 3M screen cloth discs and, consequently, the substrate. With a hand strap attached to the back of the pad, the accessory is easy to use and provides access to workpiece areas that may be hard to reach with machines.
This hand pad is available in soft and medium densities. A medium density pad is firmer ? a good match for highlighting or leveling the surface to reveal high and low spots. A soft density pad is a good match for light scuffing of the substrate.
Prior to applying primer or paint, ridding the substrate of small imperfections is no easy task. We know that operators value a clean, polished look. The 3M Screen Cloth Disc Hand Pad was engineered to help them get there.

3M 19706, Scotch-Brite EXL Unitized Wheel, XL-UW, 2S Fine, 6 in x 1/4 in x 1 in, SPR 17773A, 7010366223
3M 49689, PSA Cloth Disc 348D, 60 X-weight, 10 in x NH, Die 1000C, 7010326501
3M 94927, Scotch-Brite EXL PRO Deburring Wheel, EP-WL, 10S Fine, 8 in x 1/2 in x 3 in, 7100062983
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
3M 05520, Sanding Block, Rubber, 2-3/4 in x 8 in, 7000028366
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
3M 26016, PPS Series 2.0 Adapter, Type S9, 16 mm Male, 1.5 mm Thread, 7100135330
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
Dynabrade 95544 Gear Grease, 2.5oz. Tube
Standard Abrasives 880315, Buff and Blend GP Wheel, 2 in x 2 Ply x 1/4 in A VFN, 7100095565
3M 57173, Temflex Cotton Friction Tape 1755, 3/4 in x 60 ft, Black, 7000058870
3M™ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
Dynabrade 91163 3/8" W x 13" L 80 Grit A/O DynaCut Belt, 50/pack
3M 26119, PPS Series 2.0 Adapter, Type S27, 16 mm Male, 1.5 mm Thread, 7100135925
3M 49688, PSA Cloth Disc 348D, 80 X-weight, 10 in x NH, Die 1000C, 7000118869
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
Dynabrade 91429 1/2" W x 12" L 80 Grit A/O DynaCut Belt, 50/pack
3M 08019, Marine Grade Silicone Sealant, Clear, 3 oz Tube, 7000120480, 6/Case
3M 26136, PPS Series 2.0 Adapter, Type S32, 18 mm Female, 1.5 mm
Thread, 7100135952
3M 05182, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1/2 in x 1 in, 7100050403,Box of 4
3M 54357, Particulate Respirator 8246, R95, with Nuisance Level, Acid Gas Relief, 7000002059, 120 EA/Case
Dynabrade 51623 .1 hp Straight-Line Extension Pencil Grinder, Central Vacuum, 1/8" Collet
Insize 6212-100, MAGNETIC BASE, 220lbf, 6940561937688
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
Standard Abrasives 722809, PSA A/O Extra Disc, 5 in x NH, 60, 7010368721
3M 71358, 641WY 1/4" X 24", 600 Mesh Diamond Cloth Belt, 7010534894
3M 45722, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 6 in x NH, D/F 6HL, Die 600HZ, 7100113871
3M™ 17379, Versaflo™ Length Adjusting Breathing Tube BT-30, 7100009685, 1 EA/Case
3M 83330, Cubitron II Fibre Disc 982CX Pro, 36+, 4 in x 5/8 in, Die 400FF, 7100242928
Dynabrade 51705 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 3/32" Collet
3M 28719, Wheel Adapter Kit 28719, 1 in x 5/8-11 Internal, 7100050705
3M 16615, Accuspray Atomizing Head, Blue, 1.2 mm, 7100086837 (4 Nozzle/Kit)
3M 29902, Sanding Screen, 150 Grit, 12 in x 18 in, 7100160763
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068 
