3M Screen Cloth Disc Hand Pad Goes Hand in Hand with 3M Screen Cloth Discs
3M Screen Cloth Disc Hand Pad goes hand in hand with 3M Screen Cloth Discs. Use die numbers 500GC (5? diameter with 2 tabs), 600JR (6? diameter with 2 tabs) and 800JM (8? diameter with 2 tabs) (sold separately). Mineral is adhered to both sides of 3M screen cloth discs, so when one side of the disc wears down the other may be used. While operators typically use these discs dry during hand sanding, the screen is water resistant and may be used with a lubricant if necessary.
Each disc features two tabs. The holder pad has two ?tacks? designed for these tabs. Operators simply pierce the tabs on the disc with the tacks on the hand pad to secure the disc in place. This easy and convenient attachment system eliminates the need for adhesive, which has two key benefits. First, it helps minimize the mess that adhesive can sometimes cause. Second, as one side of the disc is not sacrificed for adhesive, both sides may be used and the disc is put to optimal use.
A Remedy for Small Surface Imperfections
When eliminating surface imperfections, evenly-applied pressure and consistent finishes tend to be top concerns. With these goals in mind, we created the 3M Screen Cloth Disc Hand Pad. This abrasive accessory helps operators apply even pressure to their 3M screen cloth discs and, consequently, the substrate. With a hand strap attached to the back of the pad, the accessory is easy to use and provides access to workpiece areas that may be hard to reach with machines.
This hand pad is available in soft and medium densities. A medium density pad is firmer ? a good match for highlighting or leveling the surface to reveal high and low spots. A soft density pad is a good match for light scuffing of the substrate.
Prior to applying primer or paint, ridding the substrate of small imperfections is no easy task. We know that operators value a clean, polished look. The 3M Screen Cloth Disc Hand Pad was engineered to help them get there.

3M 87179, Scotch-Weld Epoxy Adhesive 2216NS, Tan, Part B, 5 Gallon Drum (Pail), 7010309882
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
3M 01862, Scotch-Brite Metal Finishing Wheel, MF-WL, 5A Medium, 6 in x 1 in x 1 in, 7100003943
3M 30708, Cloth Belt 577F, 120 YF-weight, 1/4 in x 18 in, Fabri-lok, Single-flex, 7010308884, 200 per case
Standard Abrasives 880413, Buff and Blend GP Wheel, 3 in x 1 Ply x 1/4 in, A MED, 7100095202
Insize 1133-24WL, WIRELESS ELECTRONIC CALIPER (with jaw length 3.937"), 0-24"/0-600mm, built-in wireless, 6940561971385
Standard Abrasives 37446, PSA A/O Disc, 700595, 1-1/2 in x NH, 60, 7010331822
3M 00705, Interam Stainless Steel Foil Tape T-65, 4 in x 100 ft, 7100024280
3M 29821, Sanding Screen, 150 Grit, 20 in x NH, 7100160254
3M™ 53797, Flexible Diamond Belt 6451J, 1/2" Dia x 18" L, M125 Micron, Type G, Pattern B2, 7010509272
3M 05182, Scotch-Brite Cut and Polish Wheel, CP-WL, 5A Fine, 6 in x 1/2 in x 1 in, 7100050403,Box of 4
3M 50010, VentureClad Insulation Jacketing Tape 1577CW-WME, White, 99 mm x 13.7 m, 7010379907
3M 95620, Venture Tape Metal Building Facing Tape 1531CW, White, 6 in x 50 yd, 7010313495
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
3M 28126, Hookit Clean Sanding Disc 900DZ, 5 in 80 J-weight, Die 500LG, 7010290258
Standard Abrasives 726072, A/O C2 Straight Precision Cartridge Roll, 5/8 in x 2-1/2 in x 1/4 in 120, 7100098781
3M™ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
Dynabrade 92187 1" W x 30" L 80 Grit A/Z DynaCut Belt, 50/pack
Standard Abrasives 713066, PSA A/O Disc, 8 in x NH, 60, 7010370082
3M 43474, Glass Cloth Tape 3615, White, 1 in x 36 yd, 7 mil, 7000048876
3M 13172, Scotch-Brite Multi-Finishing Wheel, MU-WL, 2S Fine, 6 in x 1 in x 1 in, 7000136471
3M 65022, Scotch-Brite Deburr and Finish Pro Unitized Wheel, DP-UW, 6C Medium+, 3 in x 3/4 in x 1/4 in, 7100053421
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
Standard Abrasives 32929, PSA A/O Disc, 709607, 1/2 in x NH, 120, 7100037906
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
3M 49941, Roloc Disc 361F, 80 YF-weight, TSM, 3 in, Die RS300VM, 7000148151
3M 85327, Aluminum Foil Tape 431, Silver, 1 in x 60 yd, 3.1 mil, 7010379559
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
3M 72000, Breathe Easy High Efficiency P3 Particulate Cartridge 450-00-01R12, 7000131700, 12 EA/Case
3M 16115, PPS Cup & Collar, Mini, 7000028417, 2 per carton
Dynabrade 94990 1/4" Female Composite-Style Coupler with 1/4" Male Plug Assembly
3M 87397, Silver Depressed Center Grinding Wheel, T27 Quick Change, 4.5 in x 1/4 in x 5/8-11 in, 7010362237, Case of 20
3M 17184, Scotch-Brite Roloc EXL Unitized Wheel TR, 3 in x NH 2S FIN, 7100005209
3M 95326, Venture Tape Non-Adhesive ASJ Facing 1541, White, 23 1/2 in x 200 yd, 7010314264
Standard Abrasives 840031, Quick Change Surface Conditioning FE Disc, A/O Coarse, TSM, Brown, 3/4 in, QS75KM, 7000046845, 50/case
3M 26515, Cloth Belt 341D, P180 X-weight, 6 in x 48 in, Film-lok, Single-flex, 7000118795, 20 per case
Dynabrade 51705 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 50,000 RPM, 3/32" Collet
3M 29828, Sanding Screen, 100 Grit, 19 in x NH, 7100160248
3M 11419, Roloc Disc 361F, P240 XF-weight, TR, 2 in, Die R200P, 7000045105
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
3M 22409, Roloc Disc 361F, P120 XF-weight, TR, 1-1/2 in, Die R150S, 7000045103
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
3M 65087, Scotch-Brite Diamond Wheel, 3" x 1/2" x 3/8" 645DC, 7100083803
3M 01328, PSA Cloth Disc 348D, P180 X-weight, 3 in x NH, Die 300V, 7000045068
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091 
