3M Screen Cloth Disc Hand Pad Goes Hand in Hand with 3M Screen Cloth Discs
3M Screen Cloth Disc Hand Pad goes hand in hand with 3M Screen Cloth Discs. Use die numbers 500GC (5? diameter with 2 tabs), 600JR (6? diameter with 2 tabs) and 800JM (8? diameter with 2 tabs) (sold separately). Mineral is adhered to both sides of 3M screen cloth discs, so when one side of the disc wears down the other may be used. While operators typically use these discs dry during hand sanding, the screen is water resistant and may be used with a lubricant if necessary.
Each disc features two tabs. The holder pad has two ?tacks? designed for these tabs. Operators simply pierce the tabs on the disc with the tacks on the hand pad to secure the disc in place. This easy and convenient attachment system eliminates the need for adhesive, which has two key benefits. First, it helps minimize the mess that adhesive can sometimes cause. Second, as one side of the disc is not sacrificed for adhesive, both sides may be used and the disc is put to optimal use.
A Remedy for Small Surface Imperfections
When eliminating surface imperfections, evenly-applied pressure and consistent finishes tend to be top concerns. With these goals in mind, we created the 3M Screen Cloth Disc Hand Pad. This abrasive accessory helps operators apply even pressure to their 3M screen cloth discs and, consequently, the substrate. With a hand strap attached to the back of the pad, the accessory is easy to use and provides access to workpiece areas that may be hard to reach with machines.
This hand pad is available in soft and medium densities. A medium density pad is firmer ? a good match for highlighting or leveling the surface to reveal high and low spots. A soft density pad is a good match for light scuffing of the substrate.
Prior to applying primer or paint, ridding the substrate of small imperfections is no easy task. We know that operators value a clean, polished look. The 3M Screen Cloth Disc Hand Pad was engineered to help them get there.

3M 20905, PSA Cloth Disc 348D, P180 X-weight, 2 in x NH, Die 200P, 7000118876
Dynabrade 11254 Contact Arm Ass'y, 4-3/4" Dia. x 1/2" W
3M 22396, Roloc Disc 361F, 36 YF-weight, TR, 1-1/2 in, Die R150S, 7000045091
3M 05530, Stikit Soft Hand Pad, 2-3/4 in x 5-1/2 in x 3/8 in, 7000028351
Dynabrade 51811 .1 hp Straight-Line Pencil Grinder, Rear Exhaust, 1000,000 RPM, 1/16" Collet
3M 29831, Sanding Screen, 180 Grit, 18 in x NH, 7100160238
3M 01133, Hookit Red Finishing Film Abrasive Disc 260L, 6 in, Dust Free, P1500, 7010290267, 25 discs per carton
3M 70894, 641WY 1/2" X 24", 100 Mesh Diamond Cloth Belt, 7010533228
3M 54285, Particulate Respirator 8271, P95, 7000002047, 80 EA/Case
3M 45702, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, Die 300V, 7100113117
3M™ 37018, Supplied Air Respirator Vortex Cooling Assembly V-100/37018(AAD), 70070799013, 1 EA/Case
Dynabrade 60051 .1 hp Straight-Line Quick-Change Pencil Grinder, Rear Exhaust, 60,000 RPM, 1/8" Collet
Dynabrade 51632 .1 hp Straight-Line Pencil Grinder, Central Vacuum, 1/8" Collet
3M 29832, Sanding Screen, 150 Grit, 18 in x NH, 7100160831
3M 05049, Cloth Belt 384F, 80+ XF-weight, 1 in x 30 in, Fabri-lok, Full-flex, 7100141431, 200 per case
3M 03647, Scotch-Brite Edger Disc Pad, 7 in x .875 in, 7000133920
3M 09413, Scotch-Brite Contour Surface Paint and Varnish Remover 9413NA, 7000052005
3M 71883, Flexible Diamond Hand File 6210J, No 2, White, 18, N20, 7000082161, 10 Per Case
3M 10116, Synthetic Steel Wool Pads, 10116NA, #2 Medium, 2 in x 4 in, 7000047708
3M 11412, Roloc Disc 361F, 36 YF-weight, TR, 1 in, Die R100N, 7000045092
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
3M 22408, Roloc Disc 361F, P100 YF-weight, TR, 1-1/2 in, Die R150S, 7000045101
3M 77558, Cubitron II Hookit Cloth Disc 947A, 77558, 40+ to 120+, 6 in x NH, Die 600Z, 7100232737
3M Scotchkote Liquid Epoxy Coating Spray System HSS Mix Nozzle,Straight, 7000031879
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
3M 14316, Marine Adhesive Sealant 4000 UV, Black, 295 mL Cartridge, 7010367955, 12/Case
3M™ 17323, Versaflo™ Respiratory Helmet Assembly M-407, with Premium Visor and Flame Resistant Shroud, 7000002395, 1 EA/Case
3M 08367, Urethane Seam Sealer, Black, 310 mL Cartridge, 7000119968, 12 per case
3M 76783, Cubitron II Hookit Cloth Disc 784F, 120+ XF-weight, 5 in x NH, Die 500X, 7100222757
3M 17319, Versaflo Replacement Head Suspension M-350, for use with M-300 and M-400 Hardhats, 7000127679, 1 EA/Case
3M 77512, Cloth Belt 777F, 60 YF-weight, 1 in x 42 in, Film-lok, Single-flex, 7010307736, 200 per case
3M 24049, Wetordry Cloth Disc 281W, P1000 YF-weight, 8 in x NH, Die 800JM, 7000045052
3M 01326, PSA Cloth Disc 348D, P240 X-weight, 3 in x NH, Die 300V, 7000045069
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
3M 22395, Roloc Disc 361F, 60 YF-weight, TR, 3 in, Die R300V, 7000045098
3M 51033, Roloc Disc 361F, 36 YF-weight, TSM, 3 in, Die RS300VM, 7000148150
3M™ 07012, Supplied Air Hose W-9435-100/07012(AAD), 100 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005375, 1 EA/Case
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
3M 76631, Roloc Disc 777F, TR, 3 in x NH, 36 YF-weight, 7000028339
3M™ 72787, Calibration Kit 529-04-48, Large, 7000052154, 1 EA/Case
3M 22404, Roloc Disc 361F, 80 YF-weight, TR, 3 in, Die R300V, 7000045100 
