3M Screen Cloth Disc Hand Pad Goes Hand in Hand with 3M Screen Cloth Discs
3M Screen Cloth Disc Hand Pad goes hand in hand with 3M Screen Cloth Discs. Use die numbers 500GC (5? diameter with 2 tabs), 600JR (6? diameter with 2 tabs) and 800JM (8? diameter with 2 tabs) (sold separately). Mineral is adhered to both sides of 3M screen cloth discs, so when one side of the disc wears down the other may be used. While operators typically use these discs dry during hand sanding, the screen is water resistant and may be used with a lubricant if necessary.
Each disc features two tabs. The holder pad has two ?tacks? designed for these tabs. Operators simply pierce the tabs on the disc with the tacks on the hand pad to secure the disc in place. This easy and convenient attachment system eliminates the need for adhesive, which has two key benefits. First, it helps minimize the mess that adhesive can sometimes cause. Second, as one side of the disc is not sacrificed for adhesive, both sides may be used and the disc is put to optimal use.
A Remedy for Small Surface Imperfections
When eliminating surface imperfections, evenly-applied pressure and consistent finishes tend to be top concerns. With these goals in mind, we created the 3M Screen Cloth Disc Hand Pad. This abrasive accessory helps operators apply even pressure to their 3M screen cloth discs and, consequently, the substrate. With a hand strap attached to the back of the pad, the accessory is easy to use and provides access to workpiece areas that may be hard to reach with machines.
This hand pad is available in soft and medium densities. A medium density pad is firmer ? a good match for highlighting or leveling the surface to reveal high and low spots. A soft density pad is a good match for light scuffing of the substrate.
Prior to applying primer or paint, ridding the substrate of small imperfections is no easy task. We know that operators value a clean, polished look. The 3M Screen Cloth Disc Hand Pad was engineered to help them get there.

Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
3M 98878, General Use Flatback Tape 2515, Tan, 96 mm x 55 m, 8 Roll/Case, 7100048099
3M 31583, Hi-Strength Postforming 94 CA Fragrance Free Cylinder Spray Adhesive, Red, Large Cylinder (Net Wt 26.2 lb), 7010329925
3M 22392, Roloc Disc 361F, 24 YF-weight, TR, 3 in, Die R300V, 7000045090
Insize 7232, SCRIBER, 6928640320088
3M 97986, Hi-Strength 94 ET Cylinder Spray Adhesive, Red, Large Cylinder (Net Wt 26.2 lb), 7100018953
Dynabrade 78589 1/4" Dia. x 2" W x 1/8" Center Hole, 120 Grit, 100/pack
Dynabrade 95848 Dynabrade Gear Oil
3M 62612, Scotch-Weld Threadlocker TL71, Red, 10 mL Bottle, 7100039197, 10/case
3M 22394, Roloc Disc 361F, 50 YF-weight, TR, 3 in, Die R300V, 7000045096
3M 35083, EMI Copper Foil Shielding Tape 1181, 1/4 in x 18 yd (6,35 mm x 16,5 m), 7000132168
3M 62611, Scotch-Weld Threadlocker TL62, Red, 250 mL Bottle, 7100039195, 2/case
Dynabrade 53270 7" (180 mm) Dia. Right-Angle Disc Sander
3M 26016, PPS Series 2.0 Adapter, Type S9, 16 mm Male, 1.5 mm Thread, 7100135330
Dynabrade 92151 1/2" W x 18" L 120 Grit Ceramic DynaCut Scalloped Edge Belt, 50/pack
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
3M 25496, Scotch-Weld Epoxy Adhesive 2214 Non-Metallic Filled, Cream, 6 fl oz Cartridge, 7000121273, 4/case
Dynabrade 11475 Dynabelter Abrasive Belt Tool, Standard Duty
Dynabrade 79173 2" W x 30" L 60 Grit Ceramic DynaCut Belt, 10/pack
3M 01708, Scotch-Brite SST Deburring Wheel, ST-WL, 8S Fine, 8 in x 2 in x 3 in, 7000144590
3M 02894, Scotch Printable Flatback Paper Tape 256, White, 3/4 in x 60 yd, 6.7 mil, 48/Case, 7000047439
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
Dynabrade 78182 3" Dia. Medium DynaBrite Locking-Type Disc, 25/pack
Dynabrade 92116 1/2" W x 12" L 320 Grit A/O DynaCut Belt, 50/pack
Dynabrade 95821 Dynabrade Air Lube 10W/NR, 4oz Bottle
3M 22393, Roloc Disc 361F, 36 YF-weight, TR, 3 in, Die R300V, 7000045093
Dynabrade 53533 Cone or Plug Grinder (Triple Extension)
Dynabrade 78424 4-1/2" Dia. x 3/8" Medium DynaBrite Surface Conditioning Disc, 25/pack
3M 22407, Roloc Disc 361F, 80 YF-weight, TR, 1-1/2 in, Die R150S, 7000045099
Dynabrade 78295 3" Dia. x 6A M Medium Type R Unitized Locking-Type Disc, 25/pack
Dynabrade 78176 2" Dia. Medium NWN VT DynaBrite TR Locking-Type Disc, 25/pack
3M 22397, Roloc Disc 361F, 60 YF-weight, TR, 1-1/2 in x NH, 7000045097
3M 85492, Scotch Foil Tape 3311-10A, 2.0 in x 10 yd (50.8 mm x 9,1 m), 7010383663
3M 27551, EMI Copper Foil Shielding Tape 1181, 1/2 in x 18 yd (12.70 mm x 16.5m), 7000132182
3M 33066, Cloth Belt 341D, P100 X-weight, 25 in x 48 in, Sine-lok, Single-flex, 7010308084, 5 per case
3M 11414, Roloc Disc 361F, P120 XF-weight, TR, 1 in, Die R100N, 7000045104
3M 45702, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, Die 300V, 7100113117
3M 13767, Scotch-Brite EXL Unitized Wheel, XL-UW, 8A Coarse, 3 in x 1/2 in x 1/4 in, 7010365791
3M 87449 Silver Depressed Center Grinding Wheel, T27 Quick Change, 9 in x 1/4 in x 5/8-11 Center Hub Thread, 7010409732, 20 per case
3M 50258, Roloc Disc 777F, 60 YF-weight, TSM, 3 in, Die RS300VM, 7010325551
Standard Abrasives 42620, A/O Flap Wheel 621405, 1 in x 1 in x 1/4-20 in 60, 7010294994, 10 per case
Dynabrade 51731 .1 hp Straight-Line Pencil Grinder, 60,000 RPM, 1/8" Collet
3Mâ„¢ 72010, Replacement Filter Kit 523-01-29, 7000056891, 1 EA/Case
Standard Abrasives 547003, Adapter, 5/8"-11 Male x 3/8"-24 Female, 7010368726
3M 30708, Cloth Belt 577F, 120 YF-weight, 1/4 in x 18 in, Fabri-lok, Single-flex, 7010308884, 200 per case
3M 20910, PSA Cloth Disc 348D, 60 X-weight, 2 in x NH, Die 200P, 7000118872
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
ACS Diamond Cloth Belt, CX1250 3/8" X 24" 75U
3M 21543, Scotch-Brite Roloc Clean and Strip XT Pro Extra Cut Disc, TR, 2 in x NH, A XCS, 7100179815, 60/box
3M 45708, Cubitron II Hookit Cloth Disc 947A, 60+ X-weight, 6 in x NH, Die 600Z, 7100113142
Standard Abrasives 265006, Buff and Blend Cross Buff HS, A/O Medium, 3/4 in x 3/8 in x 2 Ply x 8-32, 7010330373
3M 27468, EMI Copper Foil Shielding Tape 1181, 1 in x 18 yd (25,40 mm x 16,5 m), 7000132169
3M Scotchkote Liquid Epoxy Coating Spray System HSS Mix Nozzle, RightAngle, 7000058900
3M 29859, Sanding Screen, 100 grit, 12 in x 18 in, 7100160861
Dynabrade 11476 Dynabelter Abrasive Belt Tool, Heavy-Duty
3M 77559, Cubitron II Hookit Cloth Disc 784F, 77559, 36+ to 120+, 5 in x NH, Die 500X, 7100232738
3M 45722, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 6 in x NH, D/F 6HL, Die 600HZ, 7100113871
Dynabrade 10690 Filter/Regulator/Lubricator, FRL40, 1/2" NPTAssy.
Standard Abrasives 32929, PSA A/O Disc, 709607, 1/2 in x NH, 120, 7100037906
3M 08214, Unversal Adhesive Black -10, 200 mL Cartridge, 7000148204, 6 per case
3M 76623, Roloc Disc 777F, 50 YF-weight, TR, 1 in, Die R100N, 7000045619
Standard Abrasives 714719, A/O Straight Cartridge Roll, 5/8 in x 2 in x 3/16 in 80, 7100092959
3M 45038, Wheel Adapter Kit No.3, 5/8-11 External, 7000028423
3M 45194, Disc Pad Face Plate 45194, 7 in Soft White, 7000120522
3Mâ„¢ 07010, Supplied Air Respirator Hose W-9435-25/07010(AAD), 25 ft, 3/8 in ID, Industrial Interchange Fittings, High Pressure, 7000005374, 1 EA/Case
3M Finesse-it Microfinishing Film Disc Roll 268L, 1-7/16 in x NH 7 Micron Scalloped, 7100040582
3Mâ„¢ 94275, Versafloâ„¢ Gold Coated Tinted Over-Visor with UV/IR Protection M-967N, 70071696879, 1 EA/Case
3M 26710, PPS Series 2.0 Spray Cup System UV Kit, Standard (22 fl oz,
650 mL), 200 Micron Filter, 7100128902
3M 20905, PSA Cloth Disc 348D, P180 X-weight, 2 in x NH, Die 200P, 7000118876
3M 01334, PSA Cloth Disc 348D, 50 X-weight, 3 in x NH, Die 300V, 7000118879
3Mâ„¢ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
3M 22405, Roloc Disc 361F, P100 YF-weight, TR, 3 in, Die R300V, 7000045102
3M 45714, Cubitron II Hookit Cloth Disc 947A, 120+ X-weight, 3 in x NH, D/F 3HL, Die 300BE, 7100113113 
