-
×
3M 20932, PSA Cloth Disc 348D, 80 X-weight, 1 in x NH, Die 100N, 7000118914
500 × $0.42 -
×
3M 11411, Roloc Disc 361F, 50 YF-weight, TR, 1 in, Die R100N, 7000045095
500 × $0.62 -
×
3M 26024, PPS Series 2.0 Spray Cup System Kit, Large (28 fl oz, 850mL), 200 Micron Filter, 7100134650
1 × $158.45 -
×
Norton 66623335427, 2" Dia Vortex Rapid Prep Quick-Change Non-Woven Abrasive Disc, Medium Grade, 50 Each
50 × $1.70 -
×
Insize ISR-C002-SPC, DATA TRANSMISSION CABLE, 6940561944938
1 × $72.40 -
×
3M 05050, Cloth Belt 384F, 80+ XF-weight, 3/4 in x 18 in, Fabri-lok, Full-flex, 7100141438, 200 per case
200 × $1.32 -
×
Dynabrade 64404 36" W x 60" L (914 mm W x 1,524 mm L) Metal Capture Downdraft Table, 230 V (AC), Side Exhaust
1 × $28,988.00 -
×
Insize 6143, DEPTH STOP FOR CALIPERS, 6928640371301
1 × $18.63
-
×
Dynabrade 11486 Dynabelter Accu-Grinder Abrasive Belt Tool, Heavy-Duty
1 × $2,022.00 -
×
3M 28126, Hookit Clean Sanding Disc 900DZ, 5 in 80 J-weight, Die 500LG, 7010290258
250 × $1.44 -
×
Insize 2197, LARGE RANGE DIGITAL RADIUS GAGE, R1(4-590"/100-1500mm), R2(4-590"/100-1500mm), 697409778087
1 × $4,148.69
-
×
3M 26119, PPS Series 2.0 Adapter, Type S27, 16 mm Male, 1.5 mm Thread, 7100135925
4 × $25.96 -
×
3M 26018, PPS Series 2.0 Adapter, Type S11, 3/8 Male, 18 Thread NPS, 7100135942
1 × $25.96 -
×
3M 54765, SandBlaster Right Angle Grinder Multi-Layer Disc 9679 60G 4-1/2 inch, 7010339877
5 × $7.27
-
×
Dynabrade 96101 Dynabrade Air Lube 10W/NR 24 Per Box
1 × $385.42 -
×
3M 26046, PPS Series 2.0 Adapter, Type S15, 3/8 Male, 19 Thread BSP, 7100135334
4 × $25.96 -
×
Norton 66623325035 - 2" 120 Grit Fine Grade Aluminum Oxide Vortex Rapid Prep Green TR Non-Woven Surface Preparation Disc, 50 Each
50 × $1.70 -
×
Insize 6140, DEPTH BASE ATTACHMENT, suitable for calipers with beam width (w) .630", 6928640303579
1 × $24.78
-
×
Dynabrade 40610 Electric Dynafile II Abrasive Belt Tool
1 × $420.00
3M 02140, Fibre Disc Backup Pad, TN Quick Change , 4-1/2 in x 5/8-11 Internal, 7000045746
$12.41
Factory Stock, 7-10 Day Leadtime
Our 3M Fibre Disc Back-up Pad is made to drive and support fiber backed discs during sanding, grinding or finishing processes. This essential pad is designed to fit right angle sanders equipped for TN Quick Change style attachments.
Essential Support for Every Job
Our 3M™ Fibre Disc Back-up Pads provide a sturdy support for fibre backed discs, which enhances the power of the abrasive when sanding, deburring and finishing. These pads are attached to a central shaft by our TN Quick Change attachment system, which is both strong and easy to change. Our 3M™ Fibre Disc Back-up Pads are made of a tough plastic material, which gives support evenly across the surface of the disc. These hard density back-up pads are strong yet still slightly flexible, which allows for smooth application of abrasive discs to metal surfaces.
