-
×
Dynabrade 13509 Dynastraight Finishing Tool, Rear Exhaust, 6,000 RPM, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor
1 × $1,186.90 -
×
Standard Abrasives 840037, Quick Change Surface Conditioning GP Disc, A/O Coarse, TSM, Brown, 3/4 in, QS75KM, 7000121646, 50/case
50 × $0.84 -
×
3M 25140, Scotch-Weld Threadlocker TL43, Blue, 250 mL Bottle, 7100039221, 2/case
2 × $126.95 -
×
Standard Abrasives 840032, Quick Change Surface Conditioning FE Disc, A/O Medium, TSM, Maroon, 3/4 in, QS75KM, 7000046846, 50/case
50 × $0.96 -
×
3M 22971, Disc Holder Adapter 9, 5/8-11 External M10-1.25 Internal, 7000046094
10 × $13.80 -
×
3M 85855, Cartridge Roll 747D, 80 X-weight, 5/8 in x 1-1/2 in x 3/16 in, 7010292565
100 × $1.46 -
×
3M™ 72122, Portable Compressed Air Filter and Regulator Panel 256-02-01, 100 cfm, 8 outlets, with Carbon Monoxide Monitor, 7000052147, 1 EA/Case
1 × $6,424.71 -
×
3M 77197, Scotch-Brite™ Roloc™ Deburr and Finish PRO Unitized Wheel,TR, 3 in x 1/8 in x NH, 8C CRS+, 7100109130, 40/box
80 × $11.06 -
×
3M 53914, Performance Plus Duct Tape 8979N Nuclear Red, 48 mm x 54.8 m 12.1 mil, 7000049014, 24/ case
1 × $33.40 -
×
3M 45120, Cartridge RoII Mandrel, 3/32 in x 3/4 in x 1/4 in, 7010328349
25 × $4.11 -
×
3M™ 72016, Remote Alarm & Strobe 529-05-20, Audible, 7000131708, 1 EA/Case
2 × $502.78
3M 05877, Reinforced Body Filler, 276 mL DMS Cartridge, 7000120099
$38.35
Factory Stock, 7-10 Day Leadtime
3M Reinforced Filler for DMS is a two-component, resin-rich filler that offers easier mixing and dispensing through the 3M Dynamic Mixing System. The system efficiently mixes the filler and hardener so that it is ready to use immediately upon being dispensed, saving automotive technicians time and effort by eliminating hand mixing.
Excellent Adhesion on Most Automotive Substrates
Our 3M™ Reinforced Filler for DMS contains milled fiberglass and is packaged in a dual cartridge system. Our reinforced filler offers excellent adhesion to steel, galvanized steel, aluminum, E coat, SMC and FRP. It provides additional strength when deeper fill and gap spanning capability are needed. This filler is ideal for weld seams, SMC, and FRP.
A Convenient Way to Mix Hardener and Filler
3M™ Reinforced Filler for DMS streamlines the process of mixing filler and hardener. Instead of manually mixing filler and hardener on a board with a spreader, the 3M™ Dynamic Mixing System delivers a perfect ratio of hardener and filler. The filler may be applied to the vehicle straight from the dispenser with the simple touch of a trigger on the 3M™ Dynamic Mixing System applicator. For the typical auto body shop, this system maximizes productivity and efficiency.
Related products
$10.54